CUT-510 High-End Aluminum Alloy Micro-Emulsion Cutting Fluid

【product performance】

High-end Aluminum Alloy Micro-emulsion Cutting Fluid. This product is specifically designed for aluminum materials using high-quality imported raw materials for blending. This product has excellent lubrication and rust resistance, good biostability, low odor, low foam, and a long fluid replacement cycle with a service life of up to 1 year or more. It is also non-irritating to the skin. It is especially suitable for use in northern regions.

【product specifications】

【method of use】

1、Before using this product, clean the oil tank or oil sump thoroughly. It is strictly prohibited to mix with other oils. Stir evenly before use.

2、Dilution ratio: original solution to water is 1: (1-10).

3、The concentration of the working solution should not be lower than 5. Adjust the appropriate concentration of the working solution according to different processing techniques and rust prevention requirements.

4、Note: For rust prevention, after 3 days, water can be added at a ratio of 10 times; after 7 days, water can be added at a ratio of 5 to 7 times; after 10 to 15 days, water can be added at a ratio of 5 to 3 times.

【packaging specifications】

18L per plastic drum, 200L per large iron drum.

High-end Aluminum Alloy Micro-emulsion Cutting Fluid CUT-510.pdf