Dk-760C6 Water-Soluble Grinding Fluid

【 Performance and use 】

Dremfu DK-760C6 Water-soluble grinding fluid is a water-soluble grinding fluid specially designed for certain high-precision machining processes (such as wire cutting). It is composed of a variety of surfactants, lubricants, rust inhibitors and other additives, mainly providing optimized cooling, lubrication and corrosion protection for specific materials (such as glass ceramics, quartz, optical glass, etc.).

【 Main technical parameters 】

【 Product advantage 】

Excellent lubricity: Water-soluble grinding fluid can significantly reduce the friction between the tool and the workpiece during the grinding process through its lubricating ingredients, which helps to reduce wear, extend tool life, and improve the surface quality of the workpiece. Excellent lubricity ensures a smoother processing process and reduces the temperature rise caused by excessive friction.

Excellent cooling effect: It can effectively take away the heat generated during the grinding process, prevent the tool and workpiece from overheating, maintain a stable processing temperature, reduce thermal deformation and thermal damage, and ensure processing accuracy and the overall quality of the workpiece.

Strong cleanliness: Water-soluble grinding fluid can help remove chips and grinding chips from the workpiece surface and processing area during the working process, ensuring that the processing area is clean and tidy. This helps to improve processing efficiency and reduce unnecessary equipment wear.

Environmentally friendly and harmless to the skin: Unlike oily grinding fluids, this water-soluble grinding fluid has less impact on the environment during use, and usually contains harmless ingredients that will not cause harm to the operator's skin, making it safer and more environmentally friendly to use.

Excellent powder sedimentation: The water-soluble grinding fluid has good powder sedimentation performance, which means that during use, the grinding fluid can effectively settle fine grinding chips and dust to the bottom, preventing these particles from affecting the processing process again, thereby reducing the impact of impurities on the processing effect.

No corrosion, long service life: This grinding fluid has excellent corrosion resistance and can maintain its effectiveness and stability even after long-term use, and is not easy to deteriorate. Its long service life reduces the cost of frequent replacement and maintenance and improves the efficiency of use.

【 Instruction 】

1. The working liquid is diluted with 10-20 times tap water or deionized water.

2. During use, the working liquid consumed can be supplemented at a concentration of 3-5%.

3. Avoid mixing with other oils.

【 Packaging 】

18L/ barrel, 25L/ barrel, 200L/ barrel.

Cutting fluid DK-760C6.pdf

【 Note 】

1. This product should not be mixed with other emulsions, semi-synthetic liquids, and fully synthetic liquids, because even if the system contains a small amount of rotten residual liquid, it will affect the use effect of the new liquid.

2.the production batch is not the same, the cutting fluid may have color differences, does not affect the normal use.

FAQ

1: Why does water-soluble grinding fluid have poor emulsification or stratification?

Poor emulsification or stratification is usually caused by inaccurate dilution ratio or the use of hard water (such as tap water with high mineral content). The solution is to ensure that it is prepared according to the recommended dilution ratio of 10-20 times, preferably using deionized or softened water.

2: Why does the grinding fluid produce too much foam during use?

Excessive foam may be caused by excessive liquid concentration or the use of inappropriate additives in the grinding fluid, especially when used under high temperature conditions. To avoid excessive foam, it is recommended to reduce the concentration of the grinding fluid or replace it with a grinding fluid designed specifically for anti-foaming. At the same time, ensure temperature control during processing.

3: What should I do if the water-soluble grinding fluid deteriorates or becomes corrupted?

If the grinding fluid smells or deteriorates, it is usually because it has been exposed to the air for a long time, causing bacterial growth or corrosion. Check and replace the grinding fluid regularly, and try to keep the grinding fluid in a closed state to avoid contamination. In addition, the use of anti-corrosion additives can also extend the service life of the grinding fluid.

4: What should I do if the grinding fluid is not cooling enough?

If the grinding fluid is not cooling enough, it may be due to incorrect dilution ratio, excessive grinding fluid consumption or insufficient fluid flow. Make sure to dilute the grinding fluid in the correct ratio and replenish the fluid regularly. Check the cooling system to ensure that the grinding fluid flow and spray pressure are sufficient.

5: Why does too high or too low grinding fluid concentration affect performance?

Too high or too low concentration will result in poor lubrication, cooling and cleaning effects. It is recommended to check the grinding fluid concentration regularly using a concentration meter or refractometer and keep it in the appropriate range of 3-5% to ensure its optimal performance.

6: What should I do if the grinding fluid does not effectively remove chips?

If the grinding fluid does not effectively remove chips, it may be due to insufficient cleanliness or flowability of the fluid. Make sure the grinding fluid contains enough cleaning ingredients and clean the equipment regularly to avoid chip accumulation. If the problem persists, you can consider using more effective cleaning ingredients or changing to a suitable grinding fluid.

7. Why choose Dremfu's water-soluble grinding fluid?

Dremfu's water-soluble grinding fluid is independently developed and produced, so the quality is guaranteed. We support OEM/ODM customization and can adjust the formula according to your needs. It has superior performance and is environmentally friendly. We also provide professional technical support and after-sales service to ensure your best processing results.