Providing effective lubrication solutions, expert technical support, and personalized one-on-one service to our customers
Dremfu Cutting Fluids are classified into four categories: emulsion oil, microemulsion Cutting Fluid, semi-synthetic Cutting Fluid, and fully synthetic Cutting Fluid. They are essential coolants used in mechanical processing, primarily serving purposes such as lubrication, cooling, cleaning, and rust prevention. They reduce friction between cutting tools and workpieces, minimize wear, and enhance surface quality and machining precision!
The selection of cutting fluids depends on factors such as materials, processes, and environmental conditions. Dremfu Cutting Fluids offer specific formulations for each type of material, including aluminum alloy cutting fluid, bronze cutting fluid, brass cutting fluid, stainless steel cutting fluid, magnesium alloy cutting fluid, hard alloy cutting fluid, carbon steel cutting fluid, titanium alloy cutting fluid, and more. Depending on different processes and environmental factors, Dremfu cutting fluids are formulated accordingly. Unsure how to choose cutting fluids? Consult Dremfuoil for professional recommendations!
Dremfu Cutting Fluids are widely used in various industries including electronics, watchmaking, automotive parts manufacturing, aerospace, mining equipment, air conditioning, household appliances, mold manufacturing, machinery manufacturing, chemical industry, biotechnology, instrumentation, medical equipment, tooling, shipbuilding, smart equipment, industrial robotics, optics, semiconductor, and more. Its applications span over 60 different industries.
Common Issues | Common Reasons | Solutions |
The cutting fluid smells bad and irritates the nose | ① Poor anti-corrosion capability of the cutting fluid; ② Strong odor from the raw materials themselves. | Switch to long-life, high-quality cutting fluid. |
The machine and products are rusting | The cutting fluid was selected improperly, resulting in poor inherent rust prevention capabilities. | Switch to a rust-inhibiting cutting fluid. |
Cutting fluid foaming and overflowing from the machine | ①Poor defoaming capability of the cutting fluid; ②Poor resistance to hard water; ③Incorrect selection of cutting fluid; it is not suitable for the corresponding process. | Add an appropriate amount of defoamer or switch to a cutting fluid with good anti-hard water and defoaming properties. |
Corrosion and oxidation discoloration of non-ferrous metals | Incorrect selection of cutting fluid; it lacks adequate oxidation resistance for non-ferrous metals such as copper and aluminum. | Switch to a cutting fluid with long-lasting oxidation resistance. |
Separation or layering of the cutting fluid | Errors in the cutting fluid formulation or raw materials can lead to problems with the emulsion system | Switch to a cutting fluid with good emulsification properties. |
Employee allergies and hand injuries | ①The cutting fluid contains prohibited substances such as nitrites, formaldehyde, or phenols; ②The cutting fluid is deteriorated or contaminated, leading to bacterial infections; ③Excessive use of bactericides harming the skin; ④The working fluid concentration/PH level is too high. | Switch to a cutting fluid that does not contain any prohibited substances. Test the cutting fluid concentration, and if it is too high, dilute it with fresh fluid. |
Rapid tool wear and poor product brightness | ①Low cutting fluid concentration; ②Insufficient lubrication properties of the cutting fluid; ③Deterioration or contamination of the cutting fluid, leading to loss of lubrication; ④Poor extreme pressure properties of the cutting fluid. | Regularly test the cutting fluid concentration, or choose a cutting fluid with good extreme pressure properties. |
Color change in the cutting fluid | Incorrect selection of cutting fluid; the components in the fluid react with certain elements in the machine tool or workpiece. | Customize the cutting fluid according to the specific requirements of the machine tool or processing material. |
Dremfu cutting fluids are formulated with branded base oils and various imported additives, ensuring stable performance during machining, low odor, strong lubrication without sticking to tools, minimal foul smell, non-skin irritating, rust and corrosion protection, and safeguarding for both machinery and workpieces.
Dremfu lubricants are recommended using a targeted approach, with one-on-one service from experienced professionals who first understand your needs and then provide tailored solutions to effectively address your lubrication challenges.
We have a strong R&D team with over 10 technical engineers, an independent laboratory, and comprehensive testing equipment. We can customize formulations based on samples or performance requirements and provide MSDS material safety data sheets as well as SGS third-party test reports
We have a self-built factory covering over 10,000 square meters, with a stock of more than 200 tons of raw materials. Our fully automated oil blending production line has unlimited capacity. As long as you place an order, we can ship routine products on the same day, and some products can be dispatched within 3 days.
We have established strategic partnerships with several international logistics companies, including Ocean Logistics, Datong Logistics, and Zhenhua Logistics. Additionally, Dremfu assigns dedicated personnel to oversee the entire process, ensuring timely delivery of every order.
Guangdong Junfu Lubrication Technology Co., Ltd. is a private science and technology enterprise integrating independent research and development, production, sales and service.
Copyright © 2024 Guangdong Junfu Lubrication Technology Co., Ltd. All rights reserved.
English
