DK-760C Glass cutting fluid

【Product Performance】

Dremfu DK-760C water-soluble cutting fluid is specially developed for optical glass, which has chemical self-sharpening effect on diamond grinding and is suitable for fine grinding, rough grinding and cutting of optical glass. Good cooling, lubrication, washing, corrosion prevention, stability and other properties.

【product parameters】

【usage method】

1. Dilution of the stock solution with 20-30 times tap water or deionized water is the working liquid, or depending on the difficulty of processing and the actual situation.

2. During use, the working liquid can be supplemented at a concentration of 3-5%.

【packaging specifications】

18L per plastic drum, 200L per large iron drum

Glass cutting fluid DK-760C  .pdf

【Note】

1. This product should not be mixed with other emulsions, semi-synthetic liquids, and fully synthetic liquids, because even if the system contains a small amount of rotten residual liquid, it will affect the use effect of the new liquid.

2.the production batch is not the same, the cutting fluid may have color differences, does not affect the normal use.

Features

Chemical self-sharpening effect

Dremfu DK-760C has a chemical self-sharpening effect, which can effectively maintain the sharpness of the diamond grinding wheel, extend the service life of the grinding wheel, reduce wear, and thus improve processing efficiency.

Good cooling performance

The cutting fluid has an excellent cooling effect, which can quickly take away the heat in the cutting process, prevent overheating, and ensure processing accuracy and material stability.

Excellent lubrication performance

The cutting fluid provides excellent lubricity, reduces friction in the cutting area, avoids excessive wear of the material, and reduces the wear rate of the tool.

Excellent cleaning effect

Dremfu DK-760C has excellent cleaning performance, which can effectively remove metal chips and impurities in the processing process and keep the processing area clean.

Corrosion protection

The cutting fluid has excellent anti-corrosion performance, effectively protects processing equipment and tools from corrosion, and extends the service life of the equipment.

Good stability

The cutting fluid maintains good stability during long-term use, is not prone to precipitation or stratification, and ensures continuous and efficient cutting effects.

Application fields

Optical glass processing

Mainly used for fine grinding, rough grinding and cutting of optical glass, widely used in the production of high-precision optical materials such as lenses, lenses, optical fiber components.

Optical instrument manufacturing

Dremfu DK-760C can be used to ensure high-precision surface quality during cutting and grinding when manufacturing precision optical instruments such as microscopes, telescopes, camera lenses, etc.

Electronic glass

Used for the processing of high-precision electronic glass, such as display screens, touch screens, etc., to ensure that the surface is flawless and meets the high standards of glass for electronic equipment.

High-end glass products

Suitable for the processing of high-end glass products, such as high-end decorative glass, glass crafts, etc., to maintain the high quality and fine surface of the products.

FAQ

How to use Dremfu DK-760C water-soluble cutting fluid?

Dremfu DK-760C cutting fluid can be configured according to the recommended dilution ratio. Generally, it is recommended to mix with water in a certain proportion, and the specific proportion can be adjusted according to the cutting process requirements.

Is Dremfu DK-760C suitable for cutting other materials?

Although this cutting fluid is mainly used for optical glass, it can also be used for cutting and grinding other hard materials, such as ceramics, carbide, etc. But in order to ensure the best effect, it is recommended to adjust the usage parameters according to the specific material.

How long is the fluid replacement cycle of this cutting fluid?

The fluid replacement cycle depends on the use conditions and cutting process. Usually, the state of the cutting fluid is checked every 2-4 weeks under continuous use. If the cutting fluid is found to be deteriorated or contaminated, it is recommended to replace it with a new fluid.

Is Dremfu DK-760C environmentally friendly?

Yes, Dremfu DK-760C cutting fluid is water-soluble and does not contain harmful chemicals, which meets environmental protection requirements. After use, the cutting fluid can be recycled and reused through proper treatment to reduce the impact on the environment.

Does Dremfu DK-760C cutting fluid have an odor?

This cutting fluid adopts a non-irritating odor formula, and there is almost no odor during use, which is more operator-friendly.

How to store Dremfu DK-760C cutting fluid?

Please store the cutting fluid in a cool and dry environment, avoiding high temperatures or direct sunlight. Make sure the container is well sealed to prevent the liquid from evaporating or contaminating.

What safety measures should be taken when using Dremfu DK-760C cutting fluid?

When using, it is recommended to wear appropriate protective equipment, such as gloves and goggles. If the cutting fluid contacts the skin or eyes, please rinse immediately with plenty of clean water. If accidentally ingested, please seek medical treatment.

Dremfu DK-760C water-soluble cutting fluid is an ideal choice for the field of optical glass processing. With its excellent cooling, lubrication, cleaning, corrosion protection and stability, it significantly improves cutting efficiency and processing accuracy, reduces tool wear and extends the service life of equipment. It is suitable for various high-precision glass processing fields, especially the fine grinding and cutting of optical glass, providing customers with efficient, environmentally friendly and economical solutions.

If you have any questions or want to buy, please contact our sales team.